Home Page | My Cart | Login/Register

Shure PSM 200 Wireless Personal Monitor System, P2TRE2

Pro Audio Microphones In-Ear Monitors Mixers Speakers Monitors - In-Ear Monitors

image
$599.99
25% off!

mail us

Overview

The PSM 200 model P2TRE2 wireless personal monitor system with mix control consists of the P2T Wireless TransMixer, the P2R Hybrid Bodypack Receiver, and clear SCL2 Sound Isolating Earphones. Email for Special Savings!

Description

   

Whether you're playing live or rehearsing, you need to hear yourself to be your best. That's what monitoring is all about. Yet some performers still struggle with booming floor wedge monitors and loud stage volume. Introducing the PSM®200 - the personal monitoring break through that performers have been waiting for. Featuring smart, versatile components that grow with you as your needs change, the PSM 200 series is a practical alternative to floor wedges for performers who want to start out In Ear and stay there.

The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.

The P2T Wireless TransMixer is another breakthrough design for personal monitoring. It allows the user to connect two line-level or mic–level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, or use line outputs from a mixing console.  In short, no matter what the output device, you can probably plug it into the TransMixer.

The PSM 200 model P2TRE2 wireless personal monitor system with mix control consists of the P2T Wireless TransMixer, the P2R Hybrid Bodypack Receiver, and clear SCL2 Sound Isolating Earphones.

P2T Wireless TransMixer

  • PSM200 Wireless TransMixer.

P2R Hybrid Bodypack Receiver

  • The P2R is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time.

SCL2 Sound Isolating Earphones

  • Single Dynamic Microdriver technology delivers full range sound and isolation from outside noise.
   

PSM®200 System

RF Carrier Frequency Range
518­-865 MHz (country dependent)
Operating Range
100 m (300 ft.) under optimal conditions
Audio Frequency Response
30 Hz to 12 kHz (+/­3 dB); earphone dependent
Total Harmonic Distortion (1 kHz)
<1% typical (Ref. +/- 35 kHz deviation)
Modulation
FM +/- 35 kHz Deviation (Nominal)
Signal-to-Noise Ratio
80 dB typical (A-weighted)
Operating Temperature
-7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)

 

P2T TransMixer

RF Output Power
30 mW (+15 dBm) typical conducted (country dependent)
Modulation Limiter
Internal peak limiter (>10:1 hard knee compression)
Antenna
1/4 Wavelength, semi-rigid, PCB Mount
P2T Audio Input
Connector Type: XLR/1/4-inch combo
Configuration: electronically balanced
Actual Impedance: 1 kilohm
Nominal Input Level: ­25 dBu @ 1/2 volume (12 o'clock)
Maximum Input Level: ­5 dBu @ 1/2 volume (12 o'clock)
Pin Assignments:
XLR: 2=hot; 3=cold, 1=ground
1/4: Tip = hot, Ring = cold, Sleeve=ground
Phantom Power Protection? Yes: Up to 52 Vdc
Current
170 mA maximum
Dimensions
220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight
370 g (13 oz.)
P2T Audio Outputs Passive connection parallel with input.
Connector Type: XLR
Configuration: electronically balanced
Pin Assignments: 2 = hot ; 3 = cold, 1 = ground
Phantom Power Protection? Yes: Up to 52 Vdc
Power Requirements
Operating voltage 12-18 Vdc
Supplied with one of the following external power supplies:
Model PS20: 120 VAC, 60 Hz input.
Model PS20E, Model PS20UK: 230 VAC, 50/60 Hz input.

 

 




P2R Receiver

RF Sensitivity
­109 dBm typical
Squelch Threshold
­102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = ­10 dBu
Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell® type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

Details

MSRP$799.99
ManufacturerShure
Stock Status100 available
Weight0.0 lbs

Reviews

Use you web browser to see comments on this product.

My Cart

Browse our site to find items you would like to order

Search


© Pro Audio Microphones In-Ear Monitors Mixers Speakers Monitors Generated in 0.134 second | 28 queries | 5 user(s) online | Powered by Cart2

You are currently in mobile version. Some functions are not available in mobile version, such as: product customization, wish list, and several others. To use those functions, please use full version on your PC.